Today's projects only took about an hour and were super fun to make. The first item is a scarf (thrift store find) and the second is a 100% cotton tank top.
 |
| The original scarf (left) and the finished tie-dyed scarf (right). The scarf was scrunched on the ends and dip dyed to create an ombre effect. |
 |
| Plain tank top (left) and the finished dip dyed tank top (right). The tank top was loosely twisted while being placed into the dye bath (see below). |
Dye packet (1)
Salt (based on instructions)
Garment (tip: use cotton, silk, linen or other natural fibre for best results)
Pot, large basin or bucket (tip: consider purchasing a stainless steel pot at your local thrift store)
Rubber gloves
Rubber bands
Large spoon
Measuring cup
What we used:
1 Tin Dylon hot water dye in "Windsor Purple"
100% Cotton tank top
Scarf from thrift store (unknown fibre)
Instructions
Step1 - Prepare garments by washing and rinsing thoroughly. Squeeze out the excess water and keep damp. Fold, twist or scrunch the fabric as desired and hold in place with several rubber bands.
Step 2 - Prepare dye bath as instructed on the dye package.
The Dylon dye we used required mixing in boiling water to dissolve the dye. The dye mixture was then added to the pot and water was added, just enough to cover the garments. The salt was added and stirred into the dye bath. The mixture was brought to a simmer for twenty minutes while stirring constantly.
Step 3 - Allow the garment to sit in the dye bath to intensify the colour and to get a stronger result.
Step 4 - Rinse fabric until water runs clear and remove the rubber bands as you are rinsing. Hang to dry, away from heat or direct sunlight.
Tips: Using the salt, ironing and/or placing the item in the dryer can help to set the colour.
If you are looking for a natural dye option check out our post on: Making Natural Dyes.
