DIY Summer Tie Dye

Nothing says summer like a tie dyed T-shirt, tank top or scarf? Tie-dye can be so versatile and fun. There are tons of techniques you can use and each provides endless possibilities. If you are looking for a way to breath new life into an old garment or you are simply looking to add a splash of colour to your decor, consider tie dying.

Today's projects only took about an hour and were super fun to make. The first item is a scarf (thrift store find) and the second is a 100% cotton tank top.

The original scarf (left) and the finished tie-dyed scarf (right). The scarf was scrunched on the ends and
dip dyed to create an ombre effect.

Plain tank top (left) and the finished dip dyed tank top (right). The tank top was loosely twisted
while being placed into the dye bath (see below).

Supplies
Dye packet (1)
Salt (based on instructions)
Garment (tip: use cotton, silk, linen or other natural fibre for best results)
Pot, large basin or bucket (tip: consider purchasing a stainless steel pot at your local thrift store)
Rubber gloves
Rubber bands
Large spoon
Measuring cup

What we used:
1 Tin Dylon hot water dye in "Windsor Purple"
100% Cotton tank top
Scarf from thrift store (unknown fibre)

Instructions
Step1 - Prepare garments by washing and rinsing thoroughly. Squeeze out the excess water and keep damp. Fold, twist or scrunch the fabric as desired and hold in place with several rubber bands.

Step 2 - Prepare dye bath as instructed on the dye package.

The Dylon dye we used required mixing in boiling water to dissolve the dye. The dye mixture was then added to the pot and water was added, just enough to cover the garments. The salt was added and stirred into the dye bath. The mixture was brought to a simmer for twenty minutes while stirring constantly.

Step 3 - Allow the garment to sit in the dye bath to intensify the colour and to get a stronger result.

Step 4 - Rinse fabric until water runs clear and remove the rubber bands as you are rinsing. Hang to dry, away from heat or direct sunlight.

Tips: Using the salt, ironing and/or placing the item in the dryer can help to set the colour.

If you are looking for a natural dye option check out our post on: Making Natural Dyes.

Making Natural Dyes

Our segment on textile art and design has been a lot of fun. For many years I have been transforming silk and other fabrics to create my Verona Collections designs. On various occasions I have explored the use of natural dyes, but primarily I use reactive dyes. The dyes I use are synthetic, but non-toxic; however, I wanted to further explore the use of natural materials for dying.

Natural dyes can be derived from plants, fruits, insects and other sources in nature. For centuries cultures around the world have perfected natural dying techniques. I researched this further and found countless books on the topic and will continue to explore this topic further as I expand and transform my own work.

On Wednesday, September 21, 2011 on Crafted Spaces Radio I shared how to prepare a natural dye bath and other tips for dying. Here are some images and further instructions.

Freshly picked Goldenrod

Start the process by separating the flowers from the rest of the plant parts and use as much of the yellow as possible. If you choose to include everything, this will influence the colour.

Place the flowers into a large stainless steel pot (thrift store find) covering with water reaching 2/3 of the pot or approximately 9 cups of water. You can also place plant material into a pantyhose (white) or wrap in cheese cloth. Please keep in mind that the material you chose to wrap with may also influence the colour of your dye bath.

Simmer for an hour and leave overnight in the pot.

Strain away the flowers from the liquid and there is the dye bath (right). It has an amber tint. You may discard remaining flowers.

Measure out eight cups of die bath and place into stainless steel pot.

(option 1) Add a 1/2 cup of table salt to the dye bath and stir.

(option 2) Prepare a fixative solution of 1/2 cup salt and 8 cup water. You will then place your damp fabric into this solution and boil for an hour. Then rinse your fabric and place into your unsalted dye bath. 

Place your damp fabric into dye bath and simmer for 1 hour. You can leave it soaking in dye bath overnight depending on the depth of colour your desire. To create a tie dye effect, twist your fabric and used a rubber band to secure. You can also place your fabric untwisted into the dye bath for complete coverage of fabric.

Silk Before

Silk After

 When finished, remove from the dye bath and rinse in cold water until water runs clear. Hang to dry and iron as needed.

Finished Project!

The final result is more muted than I anticipated, I twisted my fabric which significantly impacted the results. If the fabric was untwisted more colour would have penetrated the fabric; however, I wanted to see what type of tie dye effect I was going to get. Next time I will try using a mordant such as alum and compare the results. I hope that you enjoyed this project and for more details visit Crafted Spaces Radio for the episode that accompany this project.

It is recommended to use pots and other utensils that are dedicated to your dying projects. Do not use items that are also used for cooking or will otherwise come in contact with your food. I also suggest that prior to using any natural or other dyes, that you confirm the possible harmful nature of what you are using. Work in a well ventilated space and wear gloves as an added safe guard. There are lots of great resources available on this topic, so take the time to visit your local library or do some research on the internet. Have fun!

Some books on the topic include:

Wild Colour by Jenny Dean
The Complete Guide to Natural Dyeing by Eva Lambert
Natural Dyes by Linda Rudkin
Harvesting Color: Making Your Own Natural Dyes by Rebecca Burgess
Eco Colour by India Flint