The designs range slightly in the amount of time it requires to create them, but they all have just a few simple embroidery stitches. Our online store offers a PDF download that you can purchase and receive directly in your email. We also have available, limited quantities of our full embroidery kits.
The embroidery kits include:
- printed copy of the pattern
- pre-printed 100% cotton pattern
- instructions
- ribbon
- embroidery floss
- embroidery needle
- stitch guide
- tracing paper
There are several methods for transferring your embroidery pattern onto your fabric or other materials. The type of material you use will determine the best transfer method. The ornaments seen in this post, were made with eco felt. Felt is a bit heavy and the method I chose was to create an iron on transfer. To create the transfer I used tracing paper (transparent paper or onion skin) and an iron on transfer pen. I placed the paper over the "reverse" image of the pattern and traced over the design using the pen. I then placed the design down on my felt and used a dry, hot iron on the back of the paper. Any wax free tracing paper should be good for this process. I was able to find tracing paper at Wal-Mart and the dollar store.
Tip! Lift occasionally on one end to see if the design transfers successfully. Do not remove or shift the paper until the design has been transferred. With any method you use, it is recommended that you first test with a swatch of your fabric.
Embroidery Floss
Six-strand cotton embroidery floss was used in the projects shown. I chose white floss on a red background for a traditional holiday feel. I also think it will also look lovely on a natural linen fabric. I used DMC brand cotton embroidery floss in Blanc. Divide your embroidery floss by pulling apart three stands together. For the projects shown, three strands were used for all of the stitches except the French Knots. The French Knots were made using six strands (three strands doubled over). You can vary the thickness of your stitches by changing the number of strands you choose to work your stitches. I suggest playing around with the number of strands you use and see what you like best.
Finishing Your Embroidery Work
To finish the back of the embroidery ornaments, I tied off and trimmed the threads. I then trimmed away the excess fabric, close to the edge of the hoop. Using a small amount of fabric glue; I then attached a piece of felt cut to the size of the inner hoop. You could also use another type of glue, just ensure that it will not show through the layers of your fabric. The method I choice for finishing these embroidery ornaments can also work for other projects. I then tied a length of ribbon to hang.
Crafted Spaces Holiday Embroidery Collection is available here!
Check out our Pinterest board for great links to other embroidery resources.